Insulating

INSULATING UNDERGROUND CABLES

Conductors that transmit electricity need to be electrically insulated. One major difference between overhead lines and underground cables is the way they are insulated.

Overhead lines are insulated by air, while underground cable conductors are wrapped in layers of insulating material. Air is the simplest and cheapest insulation and the heat produced by the electricity flowing through the bare overhead conductors is removed by the flow of air over the conductors. When conductors are buried underground, robust insulation is needed to withstand the very high voltage. The insulation method depends upon the type of cable used.

Underground cables, because of the insulation and surrounding environment, tend to retain the heat produced in the copper/aluminium conductor. This heat then has to be dissipated to the surrounding environment.

To compensate for this, underground cables are generally bigger to reduce their electrical resistance and heat produced. How the heat produced is dissipated will depend upon the cable installation method.

For direct buried cables each cable needs to be well-spaced from others for good heat dissipation. To match overhead line thermal performance for a 400kV double circuit, as many as 12 separate cables in four separate trenches may be

needed, resulting in a work area up to 65m wide.

In addition, water cooling may be used. For cables installed in deep bore tunnels, cable cooling is provided by forced air ventilation or water cooling.

When designing a cable system, there are a number of factors to consider relating to the physical environment of the cable, which will help optimise their electrical performance.

These include ensuring:

• Adequate heat dissipation to prevent overheating and subsequent reduction in its capacity for carrying current.

• Adequate physical protection to protect the cable from damage and to ensure it is not a potential danger to people while in service.

• Proper access for maintenance crews to the cable to inspect, repair or replace it.